24/7 Emergency Service Licensed & Insured · License B31188501 Financing Available Serving All of Dallas–Fort Worth
Keller, Texas

Driveway Gates, Cameras & Gate Repair in Keller, TX

Keller is mostly homes, many of them on big lots, with shops and offices in Old Town and Keller Town Center. A1 installs and repairs driveway and community gates, cameras that cover a whole property, access control and alarms across the city.

Security Planned Around Keller’s Large Lots

Keller’s population was about 45,800 in 2020, and the city, roughly 18 square miles in northeast Tarrant County, is mostly residential. A good share of that land is zoned for big lots: the city’s SF-36 district is built around lots of 36,000 square feet or more, and some streets still drain to bar ditches rather than curbs. Business is concentrated in Old Town Keller and in Keller Town Center, where City Hall at 1100 Bear Creek Parkway sits next to the 101-acre Parks at Town Center, opened in 2002.

Those property types call for different security. An acre lot needs cameras that reach the driveway and the back fence line. A subdivision entrance needs a gate the Keller Fire Marshal will accept. A shop in Town Center needs clear entry and register video and a door that locks on a schedule. Our crews cover all three.

Electric lock mounted in a stainless steel post at a pedestrian gate, an example of gate access hardware for Keller, TX
Example: an electric lock that releases a pedestrian gate from a reader, keypad or intercom.

Driveway Gates for Acreage Homes

On Keller’s larger lots the driveway gate is often the first piece of security a homeowner adds. We put in and fix LiftMaster and DoorKing swing and slide operators, adding keypads, vehicle sensors, safety photo eyes and a video intercom on a post by the street so you can see a visitor before you let them in. Keller issues permits for new fences, open-style fences along a street generally have to sit at least four feet inside the property line, and lots that back up to a park, trail or open space must use wrought iron or tubular steel. Because a driveway gate sits in that fence line, we confirm placement and permits with the city for your lot before installing.

  • Gate stops partway, reverses or will not latch.
  • Remotes and keypads that work one day and fail the next.
  • Long driveways where the street intercom no longer reaches the house.
  • Operators that need a battery backup for power outages.

LiftMaster gate operator repair

Cameras That Cover the Whole Property

On a big lot the gate, barn, shop or pool can sit farther from the house than a standard network cable can run, which is about 328 feet for Ethernet. We plan those runs ahead of time, adding a network switch in an outbuilding or a fiber link where needed, and aim cameras so the gate, the drive and the back of the property are all covered, with a camera at the entry set up to read plates. Footage stays on a recorder at the house and streams to your phone. Camera equipment starts at $120 per camera. Installation, wiring, recording equipment and configuration are quoted separately. Learn more about our camera installations.

Community entry gate with swing gate operators, a keypad call box on a gooseneck pedestal and a fire department access box, an example for Keller, TX
Example: swing gate operators, a keypad call box and a fire access box at a community entrance.

HOA Entry Gates and the Keller Fire Marshal

The Keller Fire Marshal’s Office publishes a guideline for any vehicle gate over a fire lane or across an access drive into a subdivision, so it applies to HOA entrances and apartment communities as well as commercial sites. Each automatic gate needs its own permit, plus a Knox KS2 key switch mounted 5½ feet above grade under an “FD ACCESS” sign, a motor whose drive gear releases when power fails so one person can push the gate open, and a clear opening at least as wide as the required fire lane. The guideline also says the Applied Information AI-500-068 Glance preemption gate opener must be installed for all gates covering fire lanes after April 21, 2026, and the Fire Marshal’s Office tests each gate before it is placed in service.

For an HOA board, a routine gate repair can turn into a fire code question. When we service a Keller community gate we check the fire access devices along with the operator, loop detectors and call box, and we ask the Fire Marshal’s Office what your gate needs before replacing equipment. Service calls start at $180 per hour, and our 24/7 emergency service covers an entry gate that jams open or closed.

Gate and access services for HOAs

Old Town and Keller Town Center Businesses

For shops, restaurants, offices and medical suites in Old Town Keller and Keller Town Center, we combine access control that opens front and rear doors by card, phone or PIN on a schedule, cameras watching the entry, the register and the lot, and a video intercom at the delivery door. Keller Fire-Rescue’s guideline for access-controlled egress doors requires approved plans and a permit before installation, fail-safe wiring, an exit button within five feet of the door and unlocking when the building’s fire alarm activates, so we design to it from the first drawing. Most complete commercial doors run about $3,000–$3,500 including professional-grade hardware, installation and programming.

Glass double doors with exit bars and a keypad reader on a brick wall, an example business entrance for Keller, TX
Example: glass double doors with exit devices and a keypad reader.

Keller Alarm Permits

If your alarm is meant to summon police or fire, Keller requires a $25 annual permit, registered online through the city’s PMAM portal; the police department does not register permits in person. Up to three false alarms per calendar year are included, and fees climb from $50 to $100 each after that. The ordinance also prohibits setting an alarm to contact the police department directly and limits audible signals to 30 minutes except for health, panic and fire alarms. When we install or take over an alarm system we walk you through registration. Details are in our permits guide.

Keller Property Types

Large-Lot Homes

Driveway gates, long-range cameras and video intercoms.

HOA Entrances

Operators, call boxes and fire access devices.

Town Center & Old Town

Entry and register cameras, scheduled door locks.

Offices & Medical Suites

Card access, intercoms and lobby cameras.

Steps in a Keller Gate or Camera Job

  1. Property walk to measure gate openings, driveway length and cable distances.
  2. Itemized written estimate at no charge for new installations, broken out by gate, door and camera.
  3. Permits and fire review wherever the city requires them.
  4. Install, then test every gate, fire access devices included.
  5. Ongoing service backed by a 1-year workmanship warranty, service calls from $180 per hour and 24/7 emergency service.

What Keller Customers Can Count On

  • Gates, intercoms and cameras planned for large lots and long driveways.
  • We check fire access devices whenever we service a community gate.
  • Texas DPS Private Security license B31188501, insured.
  • We repair systems other companies installed.
  • Same-day service when available, and 24/7 emergency service.
  • Sunbit financing available.
Explore More

Security Services for Keller Properties

Nearby Coverage

Serving Keller & Nearby Cities

We also serve the cities around Keller in northeast Tarrant County.

View All Service Areas
Answers

Keller Security FAQ

Common questions from Keller business owners, property managers and homeowners.

What do I have to do to register my alarm with Keller police?
Yes, if the alarm is meant to summon police or fire. The permit is $25 a year and is registered online through the city’s PMAM portal (help line 877-230-1014). One to three false alarms per calendar year are included; after that it is $50 each for the fourth and fifth, $75 each for the sixth and seventh, and $100 each from the eighth on.
Does the gate at our subdivision entrance need Keller Fire Marshal approval?
Yes. In Keller every automatic gate over a fire lane or subdivision access drive needs its own permit, a Knox KS2 key switch, an operator that releases on power failure and an acceptance test by the Fire Marshal’s Office before the gate is used. Its guideline also calls for the Glance preemption opener on gates covering fire lanes after April 21, 2026. We confirm what applies to your gate with the Fire Marshal’s Office (817-743-4400) before work starts.
Do I need a permit to add a driveway gate to my fence in Keller?
Keller requires a permit for new fences and for replacing 8 linear feet or more of an existing fence, and fences get a final inspection. Open-style fences along a street generally sit at least four feet inside the property line. We treat a driveway gate as part of the fence and confirm placement and permits with the city before installing.
My Keller HOA has architectural rules. Can it block a camera on my house?
In most cases it cannot. Section 202.023 of the Texas Property Code keeps most property owners’ associations from banning security measures like cameras, motion detectors and perimeter fences. An HOA can still forbid a camera mounted somewhere other than your own property and can set the type of fence, so read your HOA’s guidelines before picking a fence or gate style.
Wired or wireless: what works for a camera far from the house?
Wired. A PoE camera gets power and video over one cable and does not rely on a battery or on Wi-Fi reaching across the yard. Ethernet runs top out around 328 feet, so for a gate or barn farther out we add a network switch partway or a fiber link and keep the camera wired.
Maglock or electric strike: which is right for a Keller storefront door?
The door and the way people leave the building decide it. Either can be used, but in Keller the installation needs approved plans and a permit, fail-safe wiring, release on power loss and fire alarm activation, and an exit button within five feet; where panic hardware is required, the manual release has to be built into the push bar. We choose the lock after looking at the door, frame and existing exit device.
What does it cost to add card access to a door in an existing building?
Most complete commercial doors run about $3,000–$3,500, including professional-grade hardware, installation and programming. We look at the door, frame, power path and existing hardware during the site walk, and the written estimate for a new installation is free.

Secure Your Keller Property

Get a free written estimate for driveway gates, gate repair, security cameras, access control or alarms in Keller, TX.

Call Now