Storefront door dragging, closer leaking oil, lock not working or door damaged in a break-in? A1 repairs commercial doors, closers and locks, with 24/7 emergency service.
A commercial door gets opened hundreds of times a day, slammed by wind, hit by carts and tried by people who should not be inside. Sooner or later something wears out. A1 Security Gate & Intercom repairs aluminum storefront doors, hollow metal doors, door closers, commercial locks and automatic doors for businesses and properties across Dallas–Fort Worth, and we offer 24/7 emergency service when a door will not lock or was damaged in a break-in.
Because we also install access control, we can fix the whole opening in one visit: the door, the hinges or pivots, the closer, the lock and any card reader or electric hardware on it.
Aluminum storefront doors usually hang on pivots at the top and bottom, sometimes with an intermediate pivot on the edge. When a pivot wears or the frame anchors loosen, the door drops, rubs the threshold and stops lining up with the lock. We replace worn pivots and hinges, re-square the door in the frame and adjust the closer so it swings and closes cleanly.
A door that will not latch is often a door that has moved. Sagging hinges, a bent frame, a strike that has shifted or a closer set too slow all keep the latch from catching. On hollow metal doors in steel frames, we often find stripped hinge screws or a door edge bent from a pry attempt. We fix the hang first, then the latch and strike.
Most aluminum storefront doors use a narrow stile deadlock or deadlatch, and Adams Rite is the name most people know. Common problems are a key that will not turn, a hookbolt that will not throw, a broken thumbturn, or a cylinder with the wrong cam that no longer reaches the lock. We repair or replace the lock body, replace the cylinder and match the cam, and fix paddle handles and pulls.
A closer that is leaking oil has failed seals, and adjusting it will not bring it back; it needs to be replaced. A closer that slams or closes too slowly usually needs its sweep and latch speed valves adjusted, though a closer that will not hold an adjustment is worn out. A door that will not close all the way can mean the latch speed is too slow, the closer is too weak for the door, or building air pressure is pushing back. Do not back the adjustment valves out too far yourself; that can cause the closer to leak.
Automatic doors rely on sensors to open and to protect people in the doorway. When a door will not open, opens by itself or stays open, the cause is often a dirty or misaligned sensor, a sensitivity setting, an obstruction in the track or a power problem. We service automatic doors with sensors and get them opening, closing and stopping safely again.

If your business was broken into, make sure everyone is safe and call the police first. Take photos of the damage for the police report and your insurance before anything is moved. Then call us. We offer 24/7 emergency service to secure the opening the same night:
Broken glass panels are replaced by a glass shop. We make the opening secure until then and restore the hardware so the door locks.

We work on all brands and repair systems installed by other companies. That includes Adams Rite storefront locks, Von Duprin and Command Access exit hardware, HES and Securitron electric strikes, and access control from HID, Keyscan, UniFi Access and Brivo. If the panic hardware is the problem, see panic bar repair. For a maglock that will not release, see magnetic lock repair. For readers and controllers, see access control repair.
Most commercial door problems are repairs: a pivot, a closer, a cylinder or an alignment. When locks are worn out, keys are everywhere, or you want card access instead of keys, it may be time to upgrade. Our commercial door locks and push bar installation services include free estimates and a 1-year workmanship warranty.
Tell us what the door is doing. Service calls start at $180 per hour.
We check the door hang, frame, closer, lock and any electric hardware together.
Common fixes are done on the spot. Parts and replacements are quoted first.
We confirm the door closes, latches, locks and opens freely from inside.
A storefront that will not lock or a door damaged in a break-in cannot wait. We offer 24/7 emergency service and same-day service when the schedule allows. Call (682) 516-9940 or request a repair visit online.
We repair commercial doors for retail stores, offices, warehouses, restaurants, clinics, apartments and HOAs in Dallas, Plano, Frisco, Allen, McKinney, Richardson, Irving, Garland, Carrollton and Fort Worth, plus the surrounding North Texas cities.
A1 repairs storefront doors, closers, commercial locks and automatic doors for businesses and properties throughout Dallas–Fort Worth and North Texas.
Common questions about commercial door repair in Dallas–Fort Worth.
Call for 24/7 emergency commercial door repair anywhere in Dallas–Fort Worth. Service calls start at $180 per hour, with same-day service when the schedule allows.