24/7 Emergency Service Licensed & Insured · License B31188501 Financing Available Serving All of Dallas–Fort Worth
Camera Repair

Security Camera Repair in Dallas–Fort Worth

Cameras offline, NVR not recording or app won't connect? A1 repairs security cameras, CCTV systems, NVRs and DVRs of most brands, including systems another company installed, with 24/7 emergency service.

Security Camera Repair for DFW Businesses

Camera systems usually fail quietly. A camera drops offline, the recorder stops saving video or the app stops connecting, and nobody notices until there's an incident and the footage isn't there. A1 Security Gate & Intercom provides security camera repair, CCTV repair and NVR/DVR repair for businesses, warehouses, retail stores, offices, clinics, apartments and homes across Dallas–Fort Worth. We repair systems we installed and systems installed by other companies, and we offer 24/7 emergency service.

Common Camera System Problems We Fix

Camera Offline or "No Signal" on the Recorder

"No signal" or "offline" means the recorder can't see the camera. When one camera is down, the cause is usually on that cable run: a damaged cable, a corroded connector, a failed camera or a dead port on the switch. When several cameras drop at once, look upstream at the PoE switch, a power supply or the recorder itself. After a power outage, IP cameras can also come back with a different network address or reset settings the recorder no longer recognizes. We test the cable, the port and the camera separately so we only replace what actually failed.

PoE Switch and Power Problems

Most IP cameras get power and data over one network cable from a PoE switch or the recorder's built-in PoE ports. When a switch is overloaded or failing, cameras reboot at random, drop out at night when their infrared lights turn on and draw more power, or won't power up at all. Older analog systems use a separate power supply box, and one failed supply can take a whole group of cameras with it. We check the power budget, the switch and the supplies, and recommend battery backup where outages are common.

NVR or DVR Not Recording

If live view works but playback is empty, the recorder isn't saving video. The usual causes are a failed or unformatted hard drive, a full drive with overwrite turned off, a recording schedule that was changed, or settings that reset after a power outage or firmware update. Recorder drives run 24 hours a day and do wear out. We check drive health, replace failed drives with surveillance-rated drives, set recording and overwrite correctly, and confirm how many days of video you are actually keeping. Our security camera maintenance guide covers the routine checks that catch this early.

Remote Viewing App Not Connecting

When cameras record fine on site but the phone app shows "offline" or spins forever, the problem is almost always the network: a new internet provider or router, a changed password, a firewall setting, a cloud service that was switched off, or an app or firmware update that broke the connection. We restore remote access, update firmware where it's safe to, and set up separate user logins so staff aren't sharing one admin password.

Night Vision Problems: Dark, Washed Out or Pink Images

If a camera goes black or grainy at night, its infrared LEDs may have failed, or the IR may be bouncing off a nearby wall, eave, window or spider web and washing out the picture. A pink or purple image during the day usually means the IR-cut filter inside the camera is stuck. Some of these are fixed by cleaning, re-aiming or moving the camera; a failed IR array or filter usually means replacing the camera.

Water Damage and Cable Damage

North Texas storms, sprinklers and summer heat are hard on outdoor equipment. Water gets in through failed seals, open cable entries and unsealed connectors, causing fogged lenses, flickering video and corrosion. Cables get cut by landscapers and contractors, chewed by rodents, or broken down by sun when they weren't rated for outdoor use. We replace damaged connectors and cable runs, seal entries with proper junction boxes, and protect exposed cable in conduit.

PoE network switch with camera cables plugged in, sitting above a network video recorder in an equipment cabinet
Example: camera cables run to a PoE switch that powers each camera, and video records to the NVR below. When several cameras drop at once, this shelf is where we start.

What We Diagnose and Repair

  • IP cameras and analog CCTV cameras, indoor and outdoor
  • NVRs and DVRs, including hard drive replacement and configuration
  • PoE switches, power supplies and battery backup
  • Network cable, coax, connectors and junction boxes
  • Remote viewing, mobile apps and user accounts
  • Night vision, focus, camera angles and image quality
  • Recording schedules, motion detection and video retention

Camera Brands We Service

We service UniFi Protect systems and repair Hikvision cameras, NVRs and DVRs, along with most other NVR and DVR brands. If you can, send a photo of the recorder's label or tell us which app you use to view the cameras, and we'll know what we're walking into.

We Repair Systems Installed by Other Companies

It doesn't matter who put the cameras in. Businesses often call us when the original installer has closed, stopped returning calls or only sold the equipment. We trace how the system is wired, work on getting admin access back when nobody has the password (we'll ask for proof that you own or manage the property), and get it recording again.

White turret dome security camera mounted under the entrance canopy of a commercial office building in DFW
Example: a turret dome camera under a commercial entrance canopy. Spider webs and glare near the lens are a common cause of washed-out night video.

How a Camera Repair Visit Works

1

Tell Us the Symptoms

Which cameras are down, since when, and what the recorder or app shows. Service calls start at $180 per hour.

2

On-Site Diagnosis

We test each camera, cable and switch port, plus the recorder and its hard drive.

3

Clear Options

We explain what failed, what it takes to fix it and whether repair or replacement makes more sense.

4

Repair & Verify

We fix the fault, confirm every camera is recording, and check playback and the app with you.

Safe Things to Check First

  • Is the recorder on, with its lights and fan running? Check the outlet, power strip and any battery backup.
  • Look at the PoE switch: are the port lights on for the cameras that are down?
  • Was there a storm, power outage, or internet or router change recently?
  • On the recorder screen, does the hard drive status show an error or "uninitialized"?
  • Restart the recorder once. If cameras come back and drop again later, note when it happens.

Don't format the hard drive if you need footage from an incident; formatting erases it. Call us first.

When Repair Isn't Worth It

Repair makes sense for a fairly new system with one or two failed parts. Replacement makes more sense when an old analog DVR system keeps failing, the recorder no longer gets firmware updates, the picture can't identify faces or plates, or you're replacing cameras one at a time year after year. In that case we'll quote a new system; see our security camera installation in Dallas and commercial camera systems pages. Estimates for new installations are free, and installations come with a 1-year workmanship warranty.

24/7 Emergency Camera Repair

If cameras went down after a break-in, right before an event or while you're dealing with theft, waiting days isn't an option. We offer 24/7 emergency service across Dallas–Fort Worth and same-day service when the schedule allows. Call (682) 516-9940 or request a repair visit. Doors or card readers giving you trouble too? See our access control repair service.

Security Camera Repair Across Dallas–Fort Worth

We repair security cameras, NVRs and DVRs in Dallas, Plano, Frisco, Allen, McKinney, Richardson, Irving, Garland, Carrollton, Fort Worth and surrounding North Texas cities.

Explore More

Related Services

Local Coverage

Security Camera Repair Across DFW

A1 repairs security cameras, NVRs and DVRs for businesses, properties and homes throughout Dallas–Fort Worth and North Texas.

View All Service Areas
Answers

Frequently Asked Questions

Common questions about security camera and NVR repair in Dallas–Fort Worth.

Why does my NVR say "no signal" for a camera?
It means the recorder can't reach that camera. With one camera, it's usually the cable, a connector, the switch port or the camera itself; with several, it's often a PoE switch, power supply or the recorder. We test each piece separately so only the failed part gets replaced.
Why is my NVR not recording?
Most often the hard drive has failed, is full with overwrite turned off, or the recording schedule changed after a power outage or update. Check whether the recorder shows a drive error, and don't format the drive if you need existing footage. We can replace the drive and set recording and retention correctly.
Why are my cameras offline in the app but working on site?
If the recorder shows live video on site, the cameras are fine and the problem is remote access. A new router or internet provider, a changed password, a firewall setting or an app update are the usual causes. We restore the connection and set up proper user logins.
Do you repair Hikvision NVRs and systems another company installed?
Yes. We repair Hikvision cameras, NVRs and DVRs, service UniFi Protect systems, and work on most other NVR and DVR brands, no matter who installed them.
How much is a security camera repair service call?
Service calls start at $180 per hour. We diagnose the system on site and explain what failed, the fix and any parts needed before we do the work.
Should I repair or replace my camera system?
Repair is usually worth it when the system is fairly new and only one or two parts failed. If an older analog DVR system keeps failing, no longer gets updates or can't capture usable detail, a new system is often the better investment, and estimates for new installations are free.

Cameras Down? Get Them Recording Again

Call A1 for 24/7 emergency camera and NVR repair across Dallas–Fort Worth. Service calls start at $180 per hour, with same-day service when the schedule allows.

Call Now